Supportnet Computer
Planet of Tech

Supportnet / Forum / Linux

Installation SUN Ultra Interprise 3000





Frage

ich hab aus einer Konkursmasse diesen SUN Server bekommen. Jetzt das grosse Problem , der Rechner ist Passwortgeschützt und installiert. Die Frage, wie kann ich diesen Rechner löschen und alles neu installieren ohne Zugangspasswort ?? Ich möchte Linux installieren, den Solaris ist mir zu teuer. Im Endefekt möchte ich diesen Rechner als Multimediaserver für Fotos und Filme benutzen. Ich würde mich sehr freuen für eine Lösung und bedanke mich zum Voraus Mit freundlichen Grüssen Richard Z. [*][quote][sup][i]*Anschrift gelöscht* Admininfo: siehe [url=https://supportnet.de/groupfaqs/3][u]FAQ 5.[/u][/url][/i][/sup][/quote]

Antwort 1 von stefanix

Hi Richard,

Um ein Betriebssystem neu zu installieren, muß die Möglichkeit gegeben sein, von CD oder Diskettenlaufwerk booten zu können.

Du mußt also im BIOS die Bootreihenfolge ändern können. Eine Sun Ultra habe ich noch nie von innen gesehen. Sollte es wie beim PC sein, kannst du eventuell durch einen Jumper das BIOS reseten oder die Stromzufuhr unterbrechen(Batterie rausnehmen), um so den Passwortschutz zu umgehen, bzw das PW zu löschen.

Falls das nichts hilft, brauchst du zwingend das Passwort. Eventuell ist auch eine Bootreihenfolge im BIOS eingestellt, so das wenn der Rechner kein gültiges System findet, er auf das nächste Laufwerk zugreift. Dann könntest du versuchen, den MBR zu löschen.

Das ist aber alles nur PC-Hardware relevant, ich weiss nicht, wie sich das auf professioneller Hardware verhält.

Grüsse, Stefan

Antwort 2 von draack

Hi,

dir ist schon bewußt, was die Kiste so an Strom verbraucht?

Ansonsten ist es eine "SUN Ultra Enterprise 3000".

Da du für die Administration sowieso Englisch können mußt, spare ich mir jetzt die Übersetzung:

I´ve forgotten the root password; how can I recover? 

 You need to have access to the machine´s console. 

1. Note the root partition (e.g. /dev/sd0a or /dev/dsk/c0t3d0s0)

2. Hit STOP-A or L1-A (or, on an ASCII terminal or emulator, send a <BREAK>) to halt the operating system, if it´s running.

3. Boot single-user from CD-ROM (boot cdrom -s) or network install/jumpstart server (boot net -s)  (NB: if it asks you for a prom password, see below.)

4. Mount the root partition (e.g. /dev/dsk/c0t3d0s0) on "/a".  "/a" is an empty mount point that exists at this stage of the installation procedure. (mount /dev/dsk/c0t3d0s0 /a)

5. Set your terminal type so you can use a full-screen editor, e.g. vi. (you can skip this step if you know how to use "ex" or "vi" from open mode).  If you´re on a sun console, type "TERM=sun; export TERM"; if you´re using an ascii terminal (or terminal emulator on a PC) for your console, set TERM to the terminal type (e.g. TERM=vt100; export TERM).

6. Edit the passwd file (/a/etc/passwd for SunOS 4.x, /a/etc/passwd.adjunct for SunOS 4.x with shadow passwords/C2 security), /a/etc/shadow for Solaris 2.x and remove the encrypted password entry for root

7. cd to /; Type "umount /a"

8. reboot as normal in single-user mode ("boot -s").  The root account will not have a password.  Give it a new one using the passwd command.


PROM passwords:

 Naturally, you may not want anyone with physical access to the machine to be able to do the above to erase the root password.  Suns have a security password mechanism in the PROM which can be set (this is turned off by default).  The man page for the eeprom command describes this feature.

If security-mode is set to "command", the machine only be booted without the prom password from the default device (i.e. booting from CD-ROM or install server will require the prom password).  Changing the root password in this case requires moving the default device (e.g. the boot disk) to a different SCSI target (or equivalent), and replacing it with a similarly bootable device for which the root password is known.  If security-mode is set to full, the machine cannot be booted without the prom password, even from the default device; defeating this requires replacing the NVRAM on the motherboard.  "Full" security has its drawbacks -- if, during normal operations,  the machine is power-cycled (e.g. by a power outage) or halted (e.g. by STOP-A), it cannot reboot without the intervention of someone who knows the prom password.


Tschö,
Volker

Ich möchte kostenlos eine Frage an die Mitglieder stellen:


Ähnliche Themen:


Suche in allen vorhandenen Beiträgen: