Supportnet / Forum / PC-Sonstiges

ich hab einen drucker canon 450 ,der nicht funktioniert ..das licht leuchtet 6 mal orang dann ein mal grun ...der drucker antwortet nicht auf den Rechner ....die batronen sid voll ..und der drucker ist schon instaliert im rechner.....bitte hilfe ...danke

Hi !

Vielleicht hilft ein Reset des Druckers. Folgendes habe ich mir mal bei Canon runtergeladen:

RESETTING CODES AND OTHER SPECIAL FUNCTONS: 

For all of these functions you first need to enter the “service mode” 

TO ENTER “SERVICE MODE”: 
1) turn off the printer. 
2) Open the lid 
3) Press and hold the resume button 
4) Press and hold the power button 
5) Release resume button 
6) Press resume twice 
7) Release the power button - the print head will now move a bit then stop. The green light will flash steadily. (if it doesn’t then you did it wrong so start again) 


From this point you can perform several functions. I will deal with them one at a time: 


a) PRINT A TEST PAGE – if you want to do this then there must be a sheet of paper in the tray and all the error codes must be clear first. – Enter “Service mode” as above. Then push power button. Close lid. The test page will print and the printer will turn itself off. 

b) PRINT EEPROM INFORMATION SHEET. – there must be paper in the tray and all error codes must be cleared first- these coded information sheets are not much good unless you know how to interpret them (just a bunch of coded numbers)- Anyway to do it enter “Service mode” as above. Then push resume once. The light should be steady orange. Press power. Close lid. The page will print and the printer will turn off. 

c) RESET PRINTER TO DEFAULT SETTINGS – This will reset various default settings but does not reprogram or restore the model setting. Enter “Service Mode” as above. Press resume twice. Steady green light will be illuminated. Push power. Print head will move a lot and the printer will turn off. Close lid. 

d) RESET WASTE INK COUNTER – Enter “Service mode” as above. Press resume 3 times. Steady orange light will be illuminated. Press power. Print head will move and printer will turn off. Close lid 

e) REPROGRAM MODEL NUMBER.- if your computer thinks the printer is a model other than S450 then this will reset it. Enter “service mode” as above. Push resume four times. Steady green light will be illuminated. Push power. Push resume three times. Orange light will be on. Push power. Print head will move and printer will turn off. Close lid. 

f) AUTO HEAD POSITION ADJUSTMENT- make sure there is a piece of paper in the tray and clear all error codes first. Then enter “ Service mode” as above. Push resume five times. Steady orange light will be illuminated. Push power. Close lid. Print head will move and it will print a sheet with a few lines of gibberish then turn itself off. 

Hope this helps a few of you. 
I think this is a great model printer. It is so easy to refill with bulk ink and really quite reliable. Mine has done more than 8000 pages and my color print head has only just now failed. I have replaced it and all is well again. I expect many thousands more copies although I expect that the black print head will probably fail too at some point and need to be replaced. But so far so good.

Gruß

Klaus

leider hat nicht geholffen danke auf jeden fall

• Zeilen automatisch erstellen
• Drucker werden nicht mehr angezeigt! warum?