Supportnet Computer
Planet of Tech

Supportnet / Forum / WindowsXP

chili green 300 GB NAS Festplatte





Frage

Leider bekomme ich weder über USB noch über Netzwerkanschluß Zugriff auf meine neu erworbene CHILI GREEN 300 GB NAS Festplatte. Wer kennt das Problem und kann mir helfen ? Danke. bk1196

Antwort 1 von TheHappyJoker

Hallo,

also per LAN allein hätte ich vielleicht noch wegen evtl. fehlenden DHCP-Server nachvollziehen können, aber per USB muss es eigentlich auf Anhieb klappen.

Was passiert denn beim Anschluss per USB?

<gruß thj>

Antwort 2 von bk1196

Auf USB reagiert er eben auch gar nicht!
Grüße

Antwort 3 von TheHappyJoker

Hallo,

gar keine Reaktion?! Hm, ich würde nochmal die Gebrauchanweisung sorgfältig durchschauen (manchmal übersieht man was) und dann am Montag wieder ab zum Händler und das Teil umtauschen.

<gruß thj>

Antwort 4 von bk1196

Ich denke auch der Controller ist defekt!
Danke.

mfg

Antwort 5 von cengel

Ich habe auch eine chili green 300 GB NAS. Das sogenannte "Handbuch" ist ein einziger Graus. Ich habe durch etwas Googlen unter http://www.jigsawpieces.co.uk die Lösung des Problems gefunden:

CP-UL-300 Enclosure0
jigsaw posted in Hardware on June 21st, 2006
Zitat:
[...]
Anyway, the enclosure allows you to place the HD on your network, set it up as an FTP server, or a SMB share, so it would be possible to use it as a share across the interweb if thats what you want to do. However, I haven’t got that far yet, it was hard enough just setting it up initially. According to the particularly rubbish manual you should just stick it on the network and be able to access it via the address http://storage-0007/ this doesn’t work.
What you actually have to do is connect it directly to your computer, set your computer to get a network address via DHCP and then access the device using the address http://169.254.0.1 which is quite cool that the device has its own built in DHCP server, it just would have been nice for the manual to point that out.
[...]


Also:
    1. PC und NAS-Platte über Patch-Kabel direkt verbunden.
    2. TCP/IP eingestellt wie im *-/\§#~-Handbuch beschrieben, also PC bezieht IP-Adresse von DHCP-Server, der ja auf der HD läuft. TCP-IP speichern, verlassen.
    3. Im Browser "http://169.254.0.1" eingeben.
    4. Mit admin/admin einloggen.
    5. Konfigurieren! Dabei eine sinnvolle IP-Adresse im eigenen Netz einstellen und DHCP aus.


Ich möchte kostenlos eine Frage an die Mitglieder stellen:


Ähnliche Themen:


Suche in allen vorhandenen Beiträgen: