Moin!
Error 18: Selected cylinder exceeds maximum supported by BIOS
This error is returned when a read is attempted at a linear block address beyond the end of the BIOS translated area. This generally happens if your disk is larger than the BIOS can handle (512MB for (E)IDE disks on older machines or larger than 8GB on others.). In more practical terms this means the BIOS is unable to start executing the kernel because the kernel is not located within the block it can access at boot up time.
This can be circumvented by creating a boot partition at the beginning of the disk that is completely within the first 1023 cylinders of the harddrive. This partition will contain the kernel.
The kernel itself does not suffer from the same limitations as the BIOS so after the BIOS has loaded the kernel the kernel will have no problem accessing the whole harddrive. Newer BIOSes will automatically translate the harddrives size in a way that it can be completely contained within the first 1023 cylinders and hence modern computers do not suffer from this problem.
The same error can happen when the BIOS detects a disk in a different way as Linux does. This can happen when changing motherboards or when moving a GRUB-bootable disk from one computer to another. If this happens, just boot with a GRUB floppy, read the C/H/S numbers from the existing partition table and manually edit the BIOS numbers to match. If using a SUSE linux and installing on VM Ware this problem is solved by creating a small partition at the very beginning of the harddisc, and mounting it as /boot.
Quelle:
wiki.linuxquestions.org/wiki/GRUB#Error_18
Um der Sache auf den Grund zu gehen, müsstest du mal ein paar Infos rausrücken.
- was für ein Notebook? (und wie alt?)
- Was für eine Platte ist verbaut?
- Wie hast du sie bei der Installation partitioniert?
Als Workaround wird in dem oben verlinkten Wiki empfohlen, bei der Installation eine kleine Bootpartition (mounten als /boot) anzulegen, die komplett innerhalb der ersten 1024 Cylinder liegt.
Normalerweise würde ich vorschlagen, den Rechner mal mit einer Live-CD zu booten und die /boot/grub/menu.lst mal anzusehen.
Da du aber über USB installiert hast, gehe ich mal davon aus, dass der Rechner kein CD-Laufwerk hat.
(oder hast du ein Live-System auf dem Stick?)
Wie auch immer - sieht mir irgendwie danach aus, als müsstest du die Kiste noch mal installieren.
Gruß
Klaus