Hallo Leute!
Habe mich gerade eben hier angemeldet, weil ich mit den verwirrenden Daten bei Hardwarechecks nicht zurecht komme.
Erstens würde es mcih freuen, wenn mir jemand eine gute Hardware-Seite nennen könnte, wo man Werte vergleichen kann und über Grundlagen etwas erfahren kann.
Aber dann habe ich auch noch ein kongrettes Problem:
Ich würde gerne wissen ob folgende
Festplatte noch brauchbar ist.
Fals nicht, würde ich gerne wissen, an wlechen Werten ich das ablesen muss:
[list]smartctl 5.39.1 2010-01-28 r3054 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen,
http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family
Device Model: ST3160021A
Serial Number: 3JS05K4F
Firmware Version: 3.04
User Capacity: 160.041.885.696 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
Local Time is: Tue Jun 1 19:52:58 2010 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 111) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 063 052 006 Pre-fail Always - 128790094
3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 148
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 1
7 Seek_Error_Rate 0x000f 082 060 030 Pre-fail Always - 8973331992
9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 8964
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 090 090 020 Old_age Always - 10985
194 Temperature_Celsius 0x0022 049 055 000 Old_age Always - 49
195 Hardware_ECC_Recovered 0x001a 063 050 000 Old_age Always - 128790094
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 7 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 7 occurred at disk power-on lifetime: 8951 hours (372 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 00 b0 9e a1 e0 Error: IDNF at LBA = 0x00a19eb0 = 10591920
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
35 00 12 9f 9e a1 e0 00 09:05:07.102 WRITE DMA EXT
34 00 01 9e 9e a1 e0 00 09:05:07.101 WRITE SECTORS(S) EXT
35 00 1e 80 9e a1 e0 00 09:05:07.101 WRITE DMA EXT
35 00 21 5f 9e a1 e0 00 09:05:07.101 WRITE DMA EXT
34 00 01 5e 9e a1 e0 00 09:05:07.100 WRITE SECTORS(S) EXT
Error 6 occurred at disk power-on lifetime: 8949 hours (372 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 00 b0 9e a1 e0 Error: IDNF at LBA = 0x00a19eb0 = 10591920
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
35 00 12 9f 9e a1 e0 00 07:42:52.748 WRITE DMA EXT
34 00 01 9e 9e a1 e0 00 07:42:52.747 WRITE SECTORS(S) EXT
35 00 1e 80 9e a1 e0 00 07:42:52.747 WRITE DMA EXT
35 00 21 5f 9e a1 e0 00 07:42:52.751 WRITE DMA EXT
34 00 01 5e 9e a1 e0 00 07:42:52.751 WRITE SECTORS(S) EXT
Error 5 occurred at disk power-on lifetime: 8948 hours (372 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 00 b0 9e a1 e0 Error: IDNF at LBA = 0x00a19eb0 = 10591920
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
35 00 12 9f 9e a1 e0 00 06:22:30.569 WRITE DMA EXT
34 00 01 9e 9e a1 e0 00 06:22:30.568 WRITE SECTORS(S) EXT
35 00 1e 80 9e a1 e0 00 06:22:30.568 WRITE DMA EXT
35 00 21 5f 9e a1 e0 00 06:22:30.568 WRITE DMA EXT
34 00 01 5e 9e a1 e0 00 06:22:30.568 WRITE SECTORS(S) EXT
Error 4 occurred at disk power-on lifetime: 8947 hours (372 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command comple
