Brenner oder MB - Problem unter Knoppix 6.5 ?

Question

11:
[srB] Unhandled sense code
[srB] Result: hostbyte=DID_QK driverbyte=DRIUER_SEMSE [srB] Sense Key : Hardware Error [current] [srB] Add. Sense: Timeout on logical unit [srB] CDB: Read(lB): 28 88 88 88 84 88 88 88 82 88 end_request: I/O error, dev srB, sector 4896 Buffer I/O error on deuice srB, logical block 512 [srB] Unhandled sense code
[srB] Result: hostbyte=DID_QK driverbyte=DRI UER_SEMSE [srB] Sense Key : Hardware Error [current] [srB] Add. Sense: Timeout on logical unit CsrBl CDB: Read(lB): 28 88 88 88 84 88 88 88 82 88 end_request: I/O error, dev srB, sector 4896 Buffer I/O error on deuice srB, logical block 512 l has disconnected
[srB] Unhandled sense code
[srBl Result: hostbyte=DID_OK driverbyte=DRIUER_SEMSE [srB] Sense Key : Hardware Error [current] [srB] Add. Sense: Timeout on logical unit [srB] CDB: Read(lB): 28 88 88 88 22 ec 88 88 82 88 endjrequest: I/O error, dev srB, sector 35768 Buffer I/O error on device srB, logical block 4478



12:

ix kernel: C ZZZ9.692232l show_signal_*s g: 63 callbacks suppressed
ix kernel: t 222S.69ZZ361 luount 144331: segfault «t li ip 8B84ac*o sp bfMbZTB error 4 in MMiunttailBf
Ix acpid: client 417418:81 has disconnected ix acpid: client connected from 4174(8:8] Ix «cpid: l client rule loaded
Ix acpid: client 4174t8:81 has disconnected Ix acpid: client connected fron 4174(8:8]
Ix acpid: l client rule loaded Ix acpid: client 4174(8:8] ha« disconnected ix acpid: client connected fron 4174(8:81 ix acpid: l client rule loaded


13:
l] ha s disconnected
! atal.BB: exception Ernask BxB SAct 8x8 SErr 8x8 action 8x6 frozen l CDB: Test Unit Ready: 88 88 88 88 88 88 atal.ee: cmd a8/88:88:88:88:88/88:88:88:BB:88/aB tag 8
res 51/Z8:83:B8:88:8B/B8:88:88:88:8B/aB Emask 8x3 (HSM violation)
atal.Be: status: i DRDY ERR >
atal: soft resetting link
atal.ee: configured for UDMA/33
atal.81: configured for UDMA/33
atal: EH complete
warning: 'grouisofs' uses 32-bit capabilities (legacy support in use)
d from 2958[B:81

14:

luaucv
Bl has disconnectcd
!] atal.80: exception Emask 8x0 SAct Bxß SErr 8x8 action 8x6 frozen l] CDB: Test Unit Ready: 08 80 88 80 08 88 ] atal.ee: CMd a0/00:00:08:00:00/00:00:88:00:80/a0 tag 8 .1 res 51/Z0:03:ee:00:0e/00:0e:00:00:00/a0 Emask 0x3 (HSM violation)
l] atal.ee: Status: { DRDY ERR >
'] atal: soft resetting link
l] atal.Be: configured for UDMA/33
i] atal.0l: configured for UDMA/33
i] atal: EH complete
I] uaniing: vgrowisofsj uses 32-bit capabilities (legacy support in use)
ed from 2950[0:0]

15:
] has disconnected
atal.88: exception Emask BxB SAct 8x8 SErr 8x8 action 8x6 frozen CDB: Test Unit Ready: 88 88 88 88 88 88 atal.88: cmd a8/88:88:88:88:88/88:88:88:88:88/a8 tag 8
res 51x28:83:88:88:8Bx88:88:88:88:88/aB Emask 8x3 (HSfl violatior atal.88: status: { DRDY ERR > atal: soft resetting link atal.88: configured for UDMA/33 atal.81: configured for UDMA/33 atal: EH complete warning: *grouisofs' uses 32-bit capabilities (legacy support in usc)


16:
x acpia. ± ciieni ruie luaaca
K ntfs-3g[33921: Uersion 2889.4.4AC.14 integrated FUSE 27
x ntfs-3gC3392]: Mounted /dev/sdaZ (Read-Write, label "XP Prof. Dell", MTFS 3.1)
x ntfs-3g[33923: Cmdllne options: rw,nosuid,inodev,noautoJusersJumask=8e8Juid=1808Jgid=1088
x ntfs-3g[33921: Mount options: pyJiwsuid,iiodev,usci^,silcnt,alloy_othcr,iiOTicwpty,rcUtii«,fsna«e=/de
x ntfs-3g[33921: Global ounership and pemissions enforced
x acpid: client 2937C0:8] has disconnected
x acpid: client connected from 2937C8:B1
x acpid: l client ruie loaded
x ntfs-3g[3545]: Uersion 2B89.4.4AC.14 Integrated FUSE 27
K ntfs-3gC35451: Mounted /dev/sda3 CRead-Write, label "Progra««", HTTS 3.1)
x ntfs-3g[35451: Cmdline options: ru,nosuid,nodev,noauto,users,u«isk=880,uid=18e8Jgid=1888
K ntfs-3g[35451: Mount options: rw,nosuid,iiodev,users,silent,allow_other,none^pty,relati«e,fsna«ie-/ae
x ntfs-3g[3545l: Global ownershlp and permissions enforced

17:
sr 8:8:0:8: [srB] Unhandled sense code
CsrB] Result: hostbyte=DID_OK driverbyte=DRIUER_SEMSE
CsrB] Sense Key : Hardware Error [currentl
[srBl Add. Sense: Timeout on logical im it
CsrBl CDB: Read(lB): 28 BB BB BB BB BB BB 88 B2 BB
end_request: I/O error, dev srB, sector B
Buffer I/O error on device srB, logical block B
CsrBl Unhandled sense code
sr B:B:B:B: [srB] Result: hostbyte=DID_OK driverbyte=DRIUER_SEMSE
[srBl Sense Key : Hardware Error [currentl
[srB] Md. Sense: Timeout on logical unit
[srB] CDB: Read(lB): 28 BB BB BB 88 8B 88 BB 82 BB
endjrequest: I/O error, dev srB, sector B Buffer I/O error on device srB, logical block 8


18:
l 81:84:38 Microknoppix kernel: [ 2829.8514921 uiwunt [ 4746 ]: segfault at 14 ip 8884ac4e sp bfc61818 error 4 in mwunt

19:
IMS disconnected
mt '/sbife'blkid -o udev -p -u noraid /dev/srB'
Mt: ktlli^T '/sbin/blkid -o udev -p -u noraid /dcv/sr8' (44571 176Z1 wr •:8:8:8: CsrBl Unhandled sense code
17661 er 8:0:8:8: Csr81 Result: hostbyte=DID_OK driuerbyte=DRIUER_SENSE
17781 Csr81 Sense Key : Hardware Error [current]
177tl CsrBl Add. Sense: Timeout on logical unit
17881 CsrB] CDB: Read(lB): 28 B8 BB 88 BB BB BB BB BZ B8
1789) endjrequest: I/O error, dev srB, sector B
17931 Buffer I/O error on device srB, logical block B
rvblkid -o udev -p -u noraid /dev/sr8J [44571 terminated by signal 9 (Killed)
iccted froM 416618:81
»18:81 has disconnected «cted fron 4166[8:81 ile loaded
11841 UKMtnt[45331: segfault at 14 ip B8B4ac4e sp bfclecbB error 4 in umount[8B48B »(8:81 has disconnected



A:

Networkflanager[27981: <warn> /sys/devices/virtual/netxlo: couldn't determine device driwr; igno !!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[28883: <info> Loaded plugin Linktop
[28881: <info> Loaded plugin Longcheer
rn [28883: <info> Loaded plugin Ericsson ran
•odem-aanager[2808l: <info> Loaded plugin MotoC
• [28881: <info> Loaded plugin Nokia
• [28881: <info> Loaded plugin Nouatel
• [2888l: <info> Loaded plugin Option
[28881: <info> Loaded plugin Samsung
• [28881: <lnfo> Loaded plugin Sierra
[28881: <info> Loaded plugin SimTech
• [2888 3: < i nfo> Loaded plug i n UauecoM
[28881: <info> Loaded plugin X22X :
[28881: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

B:
[27981: SCPlug i n-1f updown: (135413288) ... get_connecti ons.
x [27981: SCPlugin-Ifupdown: (135413288) connections count: 8
x [27981: <info> WiFi enabled by radio killswitch; enabled by state file
K [27981: <info> WWAN enabled by radio killswitch; enabled by state file
K [27981: <info> UiMAX enabled by radio killswitch; enabled by state file
K [27981: <info> Networking is enabled by state file
K [27981: <warn> /sys/devices/virtual/netxlo: couldn't determine device driwr; igno
K [2886l: <info> Loaded plugin Linktop
K [28881: <info> Loaded plugin Longcheer
K [2888]: <info> Loaded plugin Ericsson fBM
K [28881: < i nfo > Loaded

Answer 1

Sry Teil I nicht II

Hallo zusammen ,
ich habe neuerdings ein Brenner-IDE-Probleme und kann es mir nicht erklären da die Rohlinge neu ,"frisch aus der
Verpackung sind ".

Ein mögliches Problem evt das IDE-Kabel , habe es aber ausgetauscht und es wurde etwas besser (laut Knoppix 5.3 kann / ist kein DMA geschaltet ? ) ich bekomme folgende Fehlermeldungen bei k3b unter Knoppix 6.5 :
K3B zeigt hin und wieder folgende Meldung bei neuen Rohlingen :
"Using Wodim 1.1.11 - Copyright (C) 2006 Cdrkit
Starting writing at 4x speed...
cdrecord has no permission to open the device.
tou may use K3bsetup to solve this problem." oder

Reading with sector size 2 048.
Performing Optimum Power Calibration Sending CUE sheet
Starting disc write
cdrecord has no permission to open the device.
you may use Obsetup to solve this problem.

Was ich ebendo nicht verstehe wieso ich Meldungen bekomme "..Loaded plugin .." > A & B !!!!!

Dieses kenne ich von Knoppix 5.3 bzw 6.5 nicht und diese tauchen auch auf wenn keine HDD angeschlossen ist.
Laut 12er Konsole (Text per OCR gescannt , kaum korrigiert) :

1:
sr1 Result: hostbyte=DID_OK driverbyte=DRIVE_SENSE
sr1 Sense Key : Medium Error [current]
sr1 ASC=8xZ A5CQ=8x3
sr1 CDB: ReadC10): 28 00 00 23 85 8a 00 00 82 80
end_request: I/O error, dev srl, sector 9100200
Buffer I/O error cm device sr1, logical block 2295858
Buffer I/O error on device sr1, logical block 2295851
sr1 Unhandled sense code sr1 Result: hostbyte=DID_QK driverbyte=DRIUER_SENSE
sr1 Sense Key : Medium Error [current] sr1 ASC=8x2 ASCQ=8x3
sr1 CDB: Read(lB): 28 00 00 23 85 3c 00 00 82 00 end_request:
I/O error, dev srl, sector 9100400 Buffer I/O error on device srl, logical
block 2295100 Buffer I/O error on device srl, logical block 2295101
sr1 Unhandled sense code
sr1 Result: hostbyte=DID_OK driverbyte=DRIUER_SENSE
sr1 Sense Key : Medium Error [current] sr1 ASO8x2 ASCQ=8x3
sr1 CDB: Read(18): 28 00 80 If ff 6a 00 80 82 00 l end_request:
I/O error, dev srl, sector 8300008 l Buffer I/O error on device srl, logical
block 2897002 l Buffer I/O error on device srl, logical block 2897003
sr1 Unhandled sense code sr1 Result: hostbyte=DID_DK driverbyte=DRIUER_SE«SE l sr
sr1 Sense Key : Medium Error [current] l sr1 ASC=8x2 ASCQ=0x3
sr1 CDB: Read(10): 28 00 00 If ff 6a 00 00 82 00 l end.request: I/O error, dev srl, sector 8300008 l Buffer I/O error on
device sr1, logical block 2097002 l Buffer I/O error on device srl, logical block 2097003

2):
request: I/O error, dev sr0, sector 0
luffer I/O error on device sr0, logical block 0
sr0 Unhandled sense code
sr1 Result: hostbyte=DID_OK driverbyte=DRIUER_SENSE
sr0 Sense Key : Hardware Error [current]
Csr0 Add. Sense: Timeout on logical im it
sr1 CDB: Read(10): 28 00 00 00 00 00 00 00 02 00
nd_request: I/O error, dev sr8, sector 0
uff er I/O error on device sr0, logical block 0
sr0 Unhandled sense code
sr0 Result: hostbyte=DID_OK driverbyte=DRIUER_SEMSE
Csr0 Sense Key : Hardware Error [current]
Csr0 Add. Sense: Timeout on logical unit
sr0 CDB: Read(10): 28 00 00 00 08 00 00 00 82 00
nd_request: I/O error, dev sr0, sector B
iiffer I/O error on deuice sr8, logical block 8
sr81 Unhandled sense code
sr0 Result: hostbyte=DID_OK driverbyte=DRIUER_SEMSE
sr0 Sense Key : Hardware Error [current]
Csr0 Add. Sense: Timeout on logical unit
sr0 CDB: Read(18): 28 00 00 00 00 00 00 00 82 00
nd_request: I/O error, dev sr0, sector B
iffer I/O error on deuice sr0, logical block B
sr0 Unhandled sense code
sr0 Result: hostbyte=DID_OK driuerbyte=DRIUER.SENSE
sr0 Sense Key : Hardware Error [current]
sr0 Add. Sense: Timeout on logical unit
sr0 CDB: Read(lB): 28 00 00 B8 00 00 08 00 82 08
ndjrequest: I/O error, dev srfl, sector B
uff er I/O error on device sr0, logical block B
has disconnected
bin/blkid -o udev -p -u noraid /dev/ sr0*
Hing Vsbin/blkid -o udev -p -u noraid /dev/srfl' [4457]
times
sr0 Unhandled sense code
sr0 Result: hostbyte=DID_OK driverbyte=DRIUER.SEMSE
sr0 Sense Key : Hardware Error [current]
sr0 Add. Sense: Timeout on logical unit
sr0 CDB: Read(lB): 28 00 00 00 00 00 00 00 02 00
^djrequest: I/O error, dev sr0, sector B
kjffer I/O error on device sr0, logical block 8
m -o udev -p -u noraid /dev/ sr0' [44571 terminated by signal 9 (Killed)

3):
r 6 0:0:8 [ sr0J CDB Rea. 18) l H8 HM 00 98 -endjrequest: I/O error,dev sr0, sector 357* l Buffer I/O error on device sr8, logical block 4478 sr sr0 Unhandled sense code
sr0 Result: hostbyte=DIDJDK driverbyte=DRIUER_SEHSE
sr0 Sense Key : Hardware Error [current]
sr0 Add. Sense: Timeout on logical unit
sr0 CDB: Read(lB): 28 00 00 00 22 ec 00 00 82 00
end_request: I/O error, dev sr0, sector 35768
Buffer I/O error on device sr0, logical block 4478
Csr0 Unhandled sense code
Csr0 Result: hostbyte=DID_OK driverbyte=DRIUER_SEMSE
sr0 Sense Key : Hardware Error [current]
sr0 Add. Sense: Timeout on logical unit
sr0 CDB: Read(lB): 28 00 BB 00 84 00 00 00 82 00
end_request: I/O error, dev sr0, sector 4896
Buffer I/O error on device sr0, logical block 512
sr0 Unhandled sense code
sr0 Result: hostbyte=DID_OK driverbyte=DRIUER_SEMSE
sr0 Sense Key : Hardware Error [current]
sr0 Add. Sense: Timeout on logical unit
sr0 CDB: Read(lB): 28 00 00 00 84 00 00 00 82 00
end_request: I/O error, dev sr0, sector 4896
Buffer I/O error on device sr0, logical block 512
sr0 Unhandled sense code
sr0 Result: hostbyte=DID_OK driverbyte=DRIUER_SEMSE
sr0 Sense Key : Hardware Error [current]
sr0 Add. Sense: Timeout on logical unit
sr0 CDB: ReadClB): 28 00 00 00 84 00 00 00 82 00
end_request: I/O error, dev sr0, sector 4896
Buffer I/O error on device sr8, logical block 512
sr0 Unhandled sense code
sr0 Result: hostbyte=DIDJ)K driverbyte =DRIUER_SEMSE
sr0 Sense Key : Hardware Error [current]
sr0 Add. Sense: Timeout on logical unit
sr0 CDB: ReadClB): 28 00 00 00 22 ec 00 00 82 00
end_request: I/O error, dev sr0, sector 35768
Buffer I/O error on device sr0, logical block 4478
sr0 Unhandled sense code
sr0 Result: hostbyte=DID_OK driverbyte=DRIUER_SEHSE
sr0 Sense Key : Hardware Error [current] l sr0
Add. Sense: Timeout on logical unit l sr0 CDB: ReadClB): 28 00
00 00 22 ec 00 00 82 00 l endjrequest: I/O error, dev sr0, sector 35768 l Buffer I/O error on device sr0, logical block 4478

Answer 2

Teil III
4:
sr0 Unhandled sense code
sr 0:0:0:6: sr0 Result: hostbyte=DID_QK driverbyte=DRIUER_SEMSE sr0 Sense Key : Hardware Error [current] sr0 Add. Sense: Timeout on logical imit sr81 CDB: Read(lB): 28 BB BB BB 84 BB BB 00 82 BB end_request: I/O error, dev sr0, sector 4896 Buffer I/O error on deuice sr0, logical block 512 sr0 Unhandled sense code
sr0 Result: hostbyte=DID_OK driverbyte=DRIUER_SEMSE
Esr0 Sense Key : Hardware Error [current] sr0 Add. Sense:
Timeout on logical unit sr0 CDB: Read(lB): 28 00 00 00 84 00 00
00 82 BB end_request: I/O error, dev sr0, sector 4896 Buffer I/O error on device sr0, logical block 512 ] has disconnected
sr0 Unhandled sense code
sr0 Result: hostbyte=DID_OK driverbyte=DRIUER_SEMSE
sr0 Sense Key : Hardware Error [current] ! sr0 Add. Sense:
Timeout on logical unit l sr0 CDB: Read(lB): 28 00 00 00 22 ec
BB 00 82 BB l endjrequest: I/O error, dev sr0, sector 35768 l Buffer I/O error on device sr0, logical block 4478

5:

.. has disconnected ata1.00: exception Erna sk 8x8 SAct 8x8 SErr 8x8 action 8x6 frozen
CDB: Test Unit Ready: 00 00 00 00 00 00 atal.BB: cmd
aB/00:00:00:00:00/00:00:00:00:B8/aB tag 8
res 51/Z0:83:00:00:00/00:00:00:00:00/a8 Emask 8x3 (HSM violation)
atal.ee: status: { DRDY ERR > atal: soft resetting link ata1.00: configured for UDMA/33 atal.80: configured for UDMA/33 atal: EH complete
uarning: 'grouisofs' uses 32-bit capabilities (legacy support in use) i from 295810:81..

6:
atal.BB: exception Enask 8x8 SAct 8x8 SErr 8x8 action 8x6 frozen
CDB: Test Unit Ready: 00 00 00 00 00 00
atal.BB: cnd a8/00:00:00:00:00/00:00:00:00:00/a8 tag B
res 51/20:83:00:00=00/00:00:00:00:B8/aB Emask 8x3 (HSM violation)
atal.BB: Status: { DRDY ERR >
atal: soft resetting link
atal.ee: configured for UDMA/33
atal.80: configured for UDMA/33
atal: EH conplete
uarning: 'grouisofs' uses 32-bit capabilities (legacy support in use)


7):
atal.BB: exception Erna sk 8x0 SAct BxB SErr 0x0 action 0x6 frozen
CDB: Test Unit Ready: 00 00 00 00 00 00 atal.00: cmd aB/00:00:00:00:00x00:00:00:00:BB/aB tag 0
res 51/20:03:00:00:00x00:00:00:00:00/a0 Entask 0x3 (HSM violation atal.00:
status: { DRDY ERR > atal: soft resetting link atal.00: configured for
UDMA/33 atal.00: configured for UDMA/33 satal: EH complete
warning: ^growisofs' uses 32-bit capabilities (legacy support in use)

8:
sr0, logical block 8
has disconnected
bin/blkid -o udev -p -u noraid /dev/sr8J
Hing Vsbin/blkid -o udev -p -u noraid /dev/ sr0' 14457]
times
sr0 Unhandled sense code
sr0 Result: hostbyte=DID_OK driverbyte=DRIUER_SENSE
sr0 Sense Key : Hardware Error [current]
sr0 Add. Sense: Timeout on logical unit
sr0 CDB: Read(lB): 28 00 00 BB BB BB BB 00 82 00
:nd request: I/O error, dev sr0, sector B
»uffer I/O error on device sr0, logical block B
u -o udev -p -u noraid /dev/ sr0' [4457] terminated by Signal 9 (Killed)

9:
Buffer I/O error cm device sr8, logical block 4478
sr 0:8:8:8: Csr0 Unhandled sense code
Csr0 Result: hostbyte=DID_OK driverbyte=DRIUER SENSE
Csr0 Sense Key : Hardware Error [current]
CsrSl Add. Sense: Timeout on logical unit
Csr0 CDB: ReadC18): 28 88 88 88 22 ec 88 88 82 88
end_request: I/O errar, dev sr8, sector 35768
Buffer I/O error on device sr8, logical block 4478
sr0 Unhandled sense code
sr0 Result: hostbyte=DID_QK driverbyte=DRIUER_SEMSE
sr0 Sense Key : Hardware Error [current]
sr0 Add. Sense: Timeout on logical unit
sr0 CDB: Read(lB): 28 88 88 88 84 88 88 88 82 88 end_request: I/O error, dev sr0, sector 4896 Buffer I/O error on device

sr0, logical block 512
sr0 Unhandled sense code sr0 Result: hostbyte=DID_OK driverbyte=DRIUER_SEMSE sr 8:8:0:8:

sr0 Sense Key : Hardware Error [current] sr0 Add. Sense: Timeout on logical unit sr0 CDB: Read(18): 28 00 00 00 04 00 00 00

02 00 end_request: I/O error, dev sr0, sector 4096 Buffer I/O error on device sr0 logical block 512 sr0 Unhandled sense code

sr0 Result: hostbyte=DID_OK driverbyte=DRIUER_SEMSE
sr0 Sense Key : Hardware Error [current] sr0 Add. Sense: Timeout on logical unit sr0 CDB: Read(lB): 28 88 BB 80 84 88 88 88

82 88 end_request: I/O error, dev sr0, sector 4896 Buffer I/O error on device sr0, logical block 512 sr0 Unhandled sense

code sr0 Result: hostbyte=DIDJ)K driverbyte=DRIUER_SEMSE
sr0 Sense Key : Hardware Error [current] sr0 Add. Sense: Timeout on logical unit sr0 CDB: ReadtlB): 28 88 88 88 22 ec 88 88

82 88 end_request: I/O error, dev sr0, sector 35768 Buffer I/O error on device sr0, logical block 4478 sr 8:8:8:0: [ sr0l

Unhandled sense code
sr B:B:8:8: sr0 Result: hostbyte=DID_OK driverbyte=DRIUER_SENSE
sr0 Sense Key : Hardware Error [current] l sr0 Add. Sense:
Timeout on logical unit l sr 8:8:0:8: sr0 CDB: Read(10): 28 00 00 00 22 ec 00 08 02 88 l end_request: I/O error, dev sr0,

sector 35768 l Buffer I/O error on device sr0, logical block 4470

10:
sr0 Unhandled sense code
sr0 Result: hostbyte=DID_QK driverbyte=DRIUER_SEMSE
sr0 Sense Key : Hardware Error [currentl
sr0 Add. Sense: Timeout on logical imit
sr81 CDB: Read(lB): 28 88 08 80 84 80 00 00 02 00
end_request: I/O error, dev sr0, sector 4096
Buffer I/O error on deuice sr0, logical block 512
sr0 Unhandled sense code
Esr0 Result: hostbyte=DID_OK driverbyte=DRIUER_SEMSE
Csr1 Sense Key : Hardware Error [currentl
sr0 Add. Sense: Timeout on logical unit
sr0 CDB: Read(lB): 28 00 00 08 84 88 88 88 82 00 end_request:
I/O error, dev sr0, sector 4096 Buffer I/O error on device sr0, logical block 512 l has disconnected
sr0 Unhandled sense code
sr0 Result: hostbyte=DID_OK driuerbyte=DRIUER_SEMSE

sr0 Sense Key : Hardware Error [currentl
sr0 Add. Sense: Timeout on logical unit sr0 CDB: Read(lB): 28 00 00 00 22 ec 00 00 02 00 end_request: I/O error, dev sr0,

sector 35760 l Buffer I/O error on device sr0, logical block 4470

Kann mir jemande sagen was das sein kann , denn dieses @1 "..Using Wodim 1.1.11 - Copyright (C) 2006 Cdrkit?....



Taucht schon auf wenn ich den neuen Rohling formatiert und beschrieben wird.

Answer 3

hallo, versuch mal testweise mit einer älteren version.
also da du kein wort zur hardware geschrieben hast, außer ide brenner, nehme sowas wie 3 oder später.
warum?
weil die neuen versionen alle ide laufwerke, also hdd/cd als sata erkennen.[sup]*[/sup]
ansehen kannst du es mit

fdisk -lu

oder

cat /etc/mtab

[sup]*[/sup]was dazu führt, dass solche meldungen wie "kein dma" , " 80 poliges ide einsetzen" und ähnliches auftauchen.
mache mal wenn du gestartet hast

lspci

dmesg

falls auf der knoppix dvd das tool hwinfo vorhanden ist, lasse es laufen

hwinfo

sollte es nicht dabei sein, versuche ob man es temporär installieren kann

apt-get install hwinfo

hwinfo --help

was man so alles auslesen kann.
alternativ nehme testweise ein anderes live system, aber ich kann mir vorstellen, dass da ähnliche probleme auftauchen- testen aber schadet nicht.

mfg

Answer 4

Probier mal ein anderes Brennprogramm. Oder teste eine andere Distribution. Versteif Dich nicht zu sehr aufs brennen müssen. Diese Technologie ist am aussterben.